Good to hear. Sounds like I was just a week behind you so I'm hoping to get the call soon.10mmshooter wrote:Just got a stamp back today
Form 4 trust
Purchased May 2016
Check cashed June 2 2016
Arrived today
Now the one I purchased in July 2016, forget about it. Would be happy if it gets approved this year.
form 4 wait times... anyone bought one recently?
-
- SGT Premium Supporter
- Posts: 584
- Joined: Fri Nov 19, 2010 11:34 pm
- City: Spokane
- State: WA
- Favorite Firearm: The one I sold
Re: form 4 wait times... anyone bought one recently?
A big thanks to fellow veterans and active duty personnel/family for your sacrifice of this country
-
- Member
- Posts: 83
- Joined: Thu Mar 28, 2013 9:20 pm
- City: Spokane valley
- Favorite Firearm: Scar17
- Next Firearm: Pink lcp 380
Re: form 4 wait times... anyone bought one recently?
Just picked up mine..
Check cashed june 3rd 2016
Stamp came in march 2nd 2017
Check cashed june 3rd 2016
Stamp came in march 2nd 2017
- RustyShackleford
- Member
- Posts: 98
- Joined: Tue May 21, 2013 4:04 pm
- City: Spokane
- Favorite Firearm: Ceska Zbrojovka
- Next Firearm: the right carry 9mm
Re: form 4 wait times... anyone bought one recently?
Got my SBR approval this morning.
Electronic E-Form 1 - Short Barreled Rifle - Submitted/Cashed 6/27/16
Electronic E-Form 1 - Short Barreled Rifle - Submitted/Cashed 6/27/16
What country can preserve it’s liberties if their rulers are not warned from time to time that their people preserve the spirit of resistance? THE TREE OF LIBERTY MUST BE REFRESHED FROM TIME TO TIME WITH THE BLOOD OF PATRIOTS AND TYRANTS - Uncle TJ
- to4e440
- SGT Premium Supporter
- Posts: 597
- Joined: Mon Nov 15, 2010 7:37 pm
- City: Post Falls
- State: ID
- Favorite Firearm: Sig p226r srt
- Next Firearm: Sig X-five Allaround
Re: form 4 wait times... anyone bought one recently?
What are you building?RustyShackleford wrote:Got my SBR approval this morning.
Electronic E-Form 1 - Short Barreled Rifle - Submitted/Cashed 6/27/16
Help make short barrel shotguns legal.
"It's like one day Sig woke up and said, 'You know what? F*ck the ATF'"
If I'm selling stuff first one with cash gets it.
If you say your going to buy it don't wait two days to get back with me.
"It's like one day Sig woke up and said, 'You know what? F*ck the ATF'"
If I'm selling stuff first one with cash gets it.
If you say your going to buy it don't wait two days to get back with me.
- RustyShackleford
- Member
- Posts: 98
- Joined: Tue May 21, 2013 4:04 pm
- City: Spokane
- Favorite Firearm: Ceska Zbrojovka
- Next Firearm: the right carry 9mm
Re: form 4 wait times... anyone bought one recently?
It's a 7.5" 300blk on Anderson receivers. JP silent captured spring, Protection First 3lb trigger, Sharps Exo coated carrier group and Relia-bolt, Vortex Sparc red dot.
I submitted an Eform to build a can for it on 7/5 so that should be approved shortly as well. I'll update with pictures as it comes along. Going to Axis Manufacturing next week to engrave it.
I submitted an Eform to build a can for it on 7/5 so that should be approved shortly as well. I'll update with pictures as it comes along. Going to Axis Manufacturing next week to engrave it.
Last edited by RustyShackleford on Wed May 17, 2017 12:43 pm, edited 1 time in total.
What country can preserve it’s liberties if their rulers are not warned from time to time that their people preserve the spirit of resistance? THE TREE OF LIBERTY MUST BE REFRESHED FROM TIME TO TIME WITH THE BLOOD OF PATRIOTS AND TYRANTS - Uncle TJ
- RustyShackleford
- Member
- Posts: 98
- Joined: Tue May 21, 2013 4:04 pm
- City: Spokane
- Favorite Firearm: Ceska Zbrojovka
- Next Firearm: the right carry 9mm
Re: form 4 wait times... anyone bought one recently?
Submitted/Cashed July 5th, 2016 - Approved April 7th, 2017
(also my 30 cal can got approved a few days before this one)
Bought this titanium tube and end cap from SD Tactical before they stopped selling "solvent trap kits", had it engraved at axis manufacturing yesterday, ordered the Gemtech booster online somewhere, and made the K-Baffles yesterday on my lathe from aluminum. In total I've got about $300 into this, not including the stamp.
just tested it out today. It IS hearing safe, but barely. Not as quiet as I had hoped, and very much louder than my store-bought 22 can, so I will be re-visiting my baffle design. I'll probably shorten them in length, open up the small gas ports in the main cones to a larger slanted mouse-hole shape, ramp the other large gas scoops, and lengthen the first expansion chamber. I'm putting together a short video on my experience with the whole form 1 process and footage of the machining...
(also my 30 cal can got approved a few days before this one)
Bought this titanium tube and end cap from SD Tactical before they stopped selling "solvent trap kits", had it engraved at axis manufacturing yesterday, ordered the Gemtech booster online somewhere, and made the K-Baffles yesterday on my lathe from aluminum. In total I've got about $300 into this, not including the stamp.
just tested it out today. It IS hearing safe, but barely. Not as quiet as I had hoped, and very much louder than my store-bought 22 can, so I will be re-visiting my baffle design. I'll probably shorten them in length, open up the small gas ports in the main cones to a larger slanted mouse-hole shape, ramp the other large gas scoops, and lengthen the first expansion chamber. I'm putting together a short video on my experience with the whole form 1 process and footage of the machining...
What country can preserve it’s liberties if their rulers are not warned from time to time that their people preserve the spirit of resistance? THE TREE OF LIBERTY MUST BE REFRESHED FROM TIME TO TIME WITH THE BLOOD OF PATRIOTS AND TYRANTS - Uncle TJ