I have a RCBS case trimmer and it works just fine. But I was looking for something to speed up the process and stumbled on this:
http://www.littlecrowgunworks.com/wft.html
I looked at Midway for a price and found it had very good reviews:
http://www.midwayusa.com/product/997722 ... viewHeader
So I ordered one. I just ran 200 5.56mm cases though it last night and it works like a charm. The draw back is the price, $75 for just one caliber but I only load and trim 223 brass in large quantity so this fits my needs perfectly. For all other needs I can still use the RCBS.
Little Crow Gunworks World's Finest Trimmer
Forum rules
Please remember, reloading can be very dangerous if done improperly. All advice found here is from peer members, not official reloading manuals. Reload at your own risk.
Please remember, reloading can be very dangerous if done improperly. All advice found here is from peer members, not official reloading manuals. Reload at your own risk.
-
- SGT Premium Supporter
- Posts: 324
- Joined: Thu Mar 24, 2011 1:38 am
- City: Spokane Valley
- Favorite Firearm: Glock 20
- Next Firearm: Dan Wesson Razorback
- SGT Supporter: Yes
Re: Little Crow Gunworks World's Finest Trimmer
I ordered one a few years back for 300 Blackout since there's so much trimming involved in forming new cases, and I can't say enough about how much I like this product. It's definitely not something I'd run out and purchase for every caliber I load, but for those calibers like 300 BLK and 223 where you're loading and shooting in large volume then it's definitely the tool to have.rgg16g wrote:I have a RCBS case trimmer and it works just fine. But I was looking for something to speed up the process and stumbled on this:
http://www.littlecrowgunworks.com/wft.html
I looked at Midway for a price and found it had very good reviews:
http://www.midwayusa.com/product/997722 ... viewHeader
So I ordered one. I just ran 200 5.56mm cases though it last night and it works like a charm. The draw back is the price, $75 for just one caliber but I only load and trim 223 brass in large quantity so this fits my needs perfectly. For all other needs I can still use the RCBS.
Eric