Page 2 of 4
Re: Restoring the finish on a rusted gun *Lots of pics*
Posted: Thu Feb 27, 2014 11:17 am
by Johnny Law
Great! I love seeing rusted old guns being brought back to life!
Re: Restoring the finish on a rusted gun *Lots of pics*
Posted: Sat Oct 04, 2014 6:36 am
by TINCANBANDIT
Thread revival....new project
my Father-in-Law picked it up at a yard sale for $40 for me.
It is a Remington model 58 12 gauge semi-auto, made in 1956, the walnut looks pretty good but the metal has pink rust spots.
anyway, here is what it looked like when he brought it to me:
Re: Restoring the finish on a rusted gun *Lots of pics*
Posted: Sat Oct 04, 2014 6:39 am
by TINCANBANDIT
Dis-assembly, the trigger group is removed just like any other Remington 870/1100, just push out the two pins.
The stock had two holes, one for the bolt and the other for???
In this picture you can see the action bar where it attaches to the piston (which is mounted in the front portion of the magazine, which is why the magazine only holds two rounds.
The trigger housing is aluminum and the finish looks horrible, since I have not tried anodizing yet and a polished housing would look good on this gun, I decided to strip and polish it
OK now what? I guess I need to take this mess of parts and make a working trigger mechanism out of them
Re: Restoring the finish on a rusted gun *Lots of pics*
Posted: Sat Oct 04, 2014 6:54 am
by TINCANBANDIT
While I was at it I polished some of the other parts
I also polished the bearing surfaces of the hammer
After much cursing, dis-assembly and reassembly I finally have a working trigger mechanism
now on to the steel
Re: Restoring the finish on a rusted gun *Lots of pics*
Posted: Sat Oct 04, 2014 10:32 am
by TINCANBANDIT
The next step was to remove the rust and old bluing using naval jelly
I then remove the remaining bluing along with the acid "etching" with the wire wheel on my grinder
Then we start removing the pits, starting with 120 grit emory cloth, then moving to 220 grit sand paper
I kept moving up on the grit until I got to 2000 grit (wet/dry) sand paper, the metal is almost ready for bluing
I then went to work on the barrel, there was a large rust pit on the magazine ring, I used a file to get it smooth again
then I sanded the barrel to 600 grit and used the buffer to make it shine, the black stuff on the metal is buffing compound
Re: Restoring the finish on a rusted gun *Lots of pics*
Posted: Fri Oct 10, 2014 10:10 pm
by TINCANBANDIT
Re: Restoring the finish on a rusted gun *Lots of pics*
Posted: Sun Jul 26, 2015 6:48 am
by TINCANBANDIT
Just finished another project, a Ruger old model (3-screw) Blackhawk. I reblued the metal, adapted a Colt brass grip frame and made my own grip panels from bloodwood.
before
after
for those interested in seeing more, here are all the blog post links for this build
tincanbandit.blogspot.com/2015/01/ruger-old-model-blackhawk-project-part-1.html
tincanbandit.blogspot.com/2015/02/ruger-old-model-blackhawk-project-part-2.html
tincanbandit.blogspot.com/2015/04/ruger-old-model-blackhawk-project-part-3.html
tincanbandit.blogspot.com/2015/05/ruger-old-model-blackhawk-project-part-4.html
tincanbandit.blogspot.com/2015/06/ruger-old-model-blackhawk-project-part-5.html
tincanbandit.blogspot.com/2015/07/ruger-old-model-blackhawk-project-part-6.html
tincanbandit.blogspot.com/2015/07/ruger-old-model-blackhawk-project-part-7.html
Re: Restoring the finish on a rusted gun *Lots of pics*
Posted: Sun Jul 26, 2015 1:16 pm
by Flawlessfoose
Dang, I like that shotgun you refinished looks great.
Re: Restoring the finish on a rusted gun *Lots of pics*
Posted: Sun Jul 26, 2015 2:44 pm
by Stiff
TINCANBANDIT wrote:Just finished another project, a Ruger old model (3-screw) Blackhawk. I reblued the metal, adapted a Colt brass grip frame and made my own grip panels from bloodwood.
before
after
for those interested in seeing more, here are all the blog post links for this build
tincanbandit.blogspot.com/2015/01/ruger-old-model-blackhawk-project-part-1.html
tincanbandit.blogspot.com/2015/02/ruger-old-model-blackhawk-project-part-2.html
tincanbandit.blogspot.com/2015/04/ruger-old-model-blackhawk-project-part-3.html
tincanbandit.blogspot.com/2015/05/ruger-old-model-blackhawk-project-part-4.html
tincanbandit.blogspot.com/2015/06/ruger-old-model-blackhawk-project-part-5.html
tincanbandit.blogspot.com/2015/07/ruger-old-model-blackhawk-project-part-6.html
tincanbandit.blogspot.com/2015/07/ruger-old-model-blackhawk-project-part-7.html
The Brass grip frame and the grips really compliment the Blackhawk, well done in all regards!
Re: Restoring the finish on a rusted gun *Lots of pics*
Posted: Sun Jul 26, 2015 4:04 pm
by R.J.
Beautiful work & attention to detail.
Re: Restoring the finish on a rusted gun *Lots of pics*
Posted: Mon Jul 27, 2015 5:22 pm
by ron
VERY nice work for a guy who's just learning.
You should go visit Scott at Firearms Finishing off of Frances near Crestline. He is the Kung Fu MASTER of gun refinishing. He refinished a classic Belgian FN Browning Semi Automatic SA-22 for me and removed the flaws but kept the engraving and the lettering remained sharp ad he replicated the factory bluing perfectly. I was able to get it for a reasonable price ar Cabelas because it looked bear up. But I refinsished the wood with aarin tung oil, and scot did the metal and now the gun looks like a million dollars or at least $750.oo! scott is reasonable with his prices too.
Firearms Finishing
1615 E Holyoke Ave, Spokane, WA 99217
(509) 487-4145
Re: Restoring the finish on a rusted gun *Lots of pics*
Posted: Fri Jul 22, 2016 8:23 am
by TINCANBANDIT
I refinished this little single shot JC Higgins rifle a while back
http://tincanbandit.blogspot.com/2016/0 ... el-41.html
These are the before and after pics
Re: Restoring the finish on a rusted gun *Lots of pics*
Posted: Mon Jul 25, 2016 3:44 pm
by Rebel48
beautiful work re-blueing. I have a couple candidates and wonder if I could study enough get to it like you have. In the ruger pistol refinishing it appears as if you managed to keep the blueing out of the stamped letters. Is this intentional? If so how do you do it. Or is it just a trick of the cameral angle?
Re: Restoring the finish on a rusted gun *Lots of pics*
Posted: Mon Aug 01, 2016 2:57 pm
by TINCANBANDIT
Rebel48 wrote:beautiful work re-blueing. I have a couple candidates and wonder if I could study enough get to it like you have. In the ruger pistol refinishing it appears as if you managed to keep the blueing out of the stamped letters. Is this intentional? If so how do you do it. Or is it just a trick of the cameral angle?
I think what you are seeing is wax, after bluing and oiling I coat the surface with carnuba wax, it sometimes gets in the lettering. There is no way that I know of to keep the bluing out of the lettering.
Re: Restoring the finish on a rusted gun *Lots of pics*
Posted: Sun Jan 22, 2017 8:35 pm
by TINCANBANDIT
Re: Restoring the finish on a rusted gun *Lots of pics*
Posted: Sun Apr 16, 2017 4:53 am
by TINCANBANDIT
Finished another one, this one is a Western Field 740 (Marlin 336).....I had to blue it three times to get it right, but that happens sometimes....
http://tincanbandit.blogspot.com/2017/0 ... art-1.html
http://tincanbandit.blogspot.com/2017/0 ... art-2.html
Before and after pics:
Re: Restoring the finish on a rusted gun *Lots of pics*
Posted: Mon Aug 21, 2017 7:19 am
by TINCANBANDIT
Re: Restoring the finish on a rusted gun *Lots of pics*
Posted: Tue Aug 22, 2017 8:32 pm
by Flawlessfoose
Always impressed by your work tincanbandit
Re: Restoring the finish on a rusted gun *Lots of pics*
Posted: Thu Sep 28, 2017 2:38 pm
by TINCANBANDIT
I bought a rifle at a garage sale for $20, it was missing the bolt, trigger guard and rear sight elevator.
JC Higgins model 41 (Marlin 100/101). I decided to try and build a cheap youth trainer rifle, by shrinking the dimensions and then refinishing the wood and steel. I think it turned out pretty good. The best part is it didn't cost me a nickel, I actually made money on the project!
Here is what I started with:
and here it is finished:
Blog posts with more pictures documenting the changes
https://tincanbandit.blogspot.com/2017/ ... el-41.html
https://tincanbandit.blogspot.com/2017/ ... art-1.html
https://tincanbandit.blogspot.com/2017/ ... art-2.html
https://tincanbandit.blogspot.com/2017/ ... art-3.html
https://tincanbandit.blogspot.com/2017/ ... art-4.html
https://tincanbandit.blogspot.com/2017/ ... art-5.html
Re: Restoring the finish on a rusted gun *Lots of pics*
Posted: Mon Nov 13, 2017 1:46 pm
by TINCANBANDIT