4.25'' Springfield Prodigy
Posted: Thu Apr 24, 2025 8:45 am
I checked the serial number to ensure this one is, in fact, from the second run that fixed all the issues.
I think I may have gotten on of the good ones. Ran 115gr and 124gr, hot NATO to weaker loads and haven't had a malfunction.
The cerakote is worn off at the friction points (that's a good thing) now after about 350 rounds and the slide runs as it should.
No bings, blemishes or idiot marks besides the before mentioned internal cerakote.
Cleaned, degreased and put back together dry so you can add your own lube or oil and not risk any gumming up by mixing lubes.
Comes with everything in the pictures.
Box, manual, both magazines, the optic plate for that stupid HEX Dragonfly RDS from the factory as well as the AOS A14B plate which is the RMR/Holosun footprint.
I might be able to find some stickers if you need one for the back window of your pickup too.
$1000 cash money.
Post Falls area.
Idaho only. Face to face. Bill of sale. All commie rules apply.
619-964-7484
I think I may have gotten on of the good ones. Ran 115gr and 124gr, hot NATO to weaker loads and haven't had a malfunction.
The cerakote is worn off at the friction points (that's a good thing) now after about 350 rounds and the slide runs as it should.
No bings, blemishes or idiot marks besides the before mentioned internal cerakote.
Cleaned, degreased and put back together dry so you can add your own lube or oil and not risk any gumming up by mixing lubes.
Comes with everything in the pictures.
Box, manual, both magazines, the optic plate for that stupid HEX Dragonfly RDS from the factory as well as the AOS A14B plate which is the RMR/Holosun footprint.
I might be able to find some stickers if you need one for the back window of your pickup too.
$1000 cash money.
Post Falls area.
Idaho only. Face to face. Bill of sale. All commie rules apply.
619-964-7484