MagnetoSpeed V3 Ballistic Chronograph in Hard Case - Used - $275

Post firearm parts / accessories / storage / services offered - For Sale / Barter / Trade...
Forum rules
It is every member's responsibility to know and follow all local, State & Federal laws regarding the sale or transfer of firearms/parts/etc...in their respective jurisdictions. No illegal activity will be allowed here on SGT. This is a zero tolerance rule and will be strictly enforced. Violators will be banned permanently. Proceed solely at your own risk.
Post Reply
cfp
Rookie Member
Posts: 7
Joined: Wed Dec 25, 2019 8:45 am
City: Spokane
State: Wa

MagnetoSpeed V3 Ballistic Chronograph in Hard Case - Used - $275

Post by cfp » Sun Apr 14, 2024 5:27 pm

MagnetoSpeed V3 Ballistic Chronograph in Hard Case - Used - $275

Used in like new condition.
Includes hard case.

The MagnetoSpeed V3 ballistic chronograph kit was designed to be used on barrels and suppressors from 1/2 inch all the way up to 2 inches in diameter. In addition to the larger diameter tolerance, the V3 also has one inch more clearance in the blast zone to account for longer (up to 3" in most cases) muzzle brakes, flash hiders, etc.

MagnetoSpeed V3 features an improved designed with the following features:
Improved Display
Three-button menu system
Battery options are; (1) 9-Volt or (2) CR123s
Easy access battery compartment, no need for screwdriver to swap batteries
Improved shooting modes, with the ability to now operate with air guns
Downloadable firmware updates
Advanced data logging and troubleshooting capabilities
More compact and rugged display housing
Rapid mode with rate-of-fire
Redesigned Bayonet
Rugged strapping system; with metal buckle and triad thumb nut
Proven technology with updated sensor design
New profile and color scheme
New bracket to allow for future alternative attachment options
Dual data connection points

Kit includes:
Display Unit
Retractable connection cable
Standard 6ft connection cable
Stainless steel blast shield
Thick and thin rubber V-block spacers
microSD card with adapter
Bayonet sensor
Polymer spacer kit with screw hardware and allen wrench
Heavy duty strap with thumb nut tightener
Hard case with custom cut foam
Alignment rod
Instructions

Note: Do not mount bayonet on any suppressor covers. The bayonet must be mounted directly on to the suppressor to ensure parallel mounting and prevent possible bullet strikes.
You do not have the required permissions to view the files attached to this post.

Post Reply